| |
|
Tandem Press Brakes
From
Pacific
|
|
| |
| |
|
The Industry Standard
for Long Part Bending Applications
|
| |
| Pacific has been known for hydraulic bending leadership across
a number of different markets and applications-with the productive
K-Series and Fabri-K Series designs representing the best in
manually and CNC-controlled precision fabrication. These technologies
can be hooked up in tandem (two or more) to deliver a unique
solution toward forming extra long pieces. Plus, versatility
to operate each machine as a separate unit is as simple as flipping
a switch (electronic and hydraulic disconnection, no demounting
anything, no physical connection between presses). |
| |
| Compared to other tandem configurations, Pacific Tandem Press
Brakes are fully synchronized…interfaced electrically and
synchronized hydraulically. Others typically use an "on-off"
control with limit switches. The difference? A wide gap in precision
(rams move within .001") of each other, set-up (no need
for a de-mountable connection between rams) and overall part
accuracy. |
| |
| Choose from 175 to 3000 ton standard models, 8-30' standard
bed lengths. |
| |
|
| |
|
Application Considerations
|
| |
|
Beds for each K or FK Press Brake are butted end-to-end
with a small 1-1/8" gap between the rams to allow a reasonable
amount of tilt. During operation, the adjoining male dies
are positioned so the gap is as close as 1/16" to deliver
a continuous die effect.
Customer typical bend shapes should be identified to ensure
part production without any throat clearance problems. (deeper
and/or higher throat designs might be applicable)
Tandem K-Series Presses do not need to be the same length.
Matching tonnages, however, are normally used, but different
tonnages can be modified (via hydraulic design changes) so
their velocities match to allow good synchronization.
Removable wide platens may be installed on one or both machines.
However, they will extend between side housings only and therefore,
can not be used for full length tandem operation.
Future expandability is possible. The possibility of buying
one machine now and one later matches with the concept of
growing your capabilities in steps.
|
| |
| To request detailed information on Tandem Pressbrakes, including
technical specifications, please contact us at (800) 540-7037
or simply e-mail us. |
| |
| |
| |
Copyright 2005, Hart Machine Tool,
Inc. All Rights Reserved.
Designed and Hosted
By:
 |
